Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bending of bars, mat. 7050T7451 or T63

Status
Not open for further replies.
cri

cri

Mechanical
Joined
Oct 11, 2002
Messages
3
Location
IT
Hallo

we need to bend bars (150x80) 5mt long, mat. 7050T7451 or T63, according to AMS 4108.

Does anybody know max temperature and parameters(holding time..) of the subsequent heat treatment to reduce stresses induced by bending?

Thanks a lot in advance for any information you might supply






 
Status
Not open for further replies.

Similar threads

dandy408
  • Question Question
Strongest material heat treated or non-heat treated
Replies
1
Views
7K
EdStainless
EdStainless
enginesrus
  • Locked
  • Question Question
What brass or bronze for water couplings?
Replies
9
Views
6K
Brooke William
B
A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A
akv1234
  • Locked
  • Question Question
bending and deep scouring on bucket hydraulic cylinder of an excavator- pl share your experience
Replies
3
Views
346
3DDave
3DDave
A
  • Question Question
Heat treatment of 17-4PH separately cast specimens
Replies
13
Views
14K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top