Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WELDING OF SS TUBE AISI 316 Ti 1

Status
Not open for further replies.
walha76

walha76

Mechanical
Feb 17, 2006
8
I'm looking for the welding procedure to weld stainless steel pipes diam from 10mm to 48 mm. materail AISI 316 Ti
What is the best electrode for this kind of material
Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Suggested filler metal for joining the 316 Ti SS to 316 Ti SS is ER 316L using the GTAW process. Cleanliness is important. No preheat, and keep the interpass temperature less than 350 deg F.

Source; Avesta Welding Manual
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

IdanPV
  • Question
Welding of S355JR
Replies
1
Views
191
kingnero
kingnero
metboss
  • Question
Welding Procedure Specification (WPS) for the base metal AISI 8630(weld overlay cladding
Replies
2
Views
250
gtaw
gtaw
S.G
  • Locked
  • Question
Welding L-80 Type-1 Tubing to AISI 4130 Hammer Union
Replies
1
Views
2K
jmec87
jmec87
John Jones
  • Locked
  • Question
WPS/WPQR 304/316
Replies
1
Views
1K
kingnero
kingnero
Abdennour
  • Locked
  • Question
Dissimilar welding of SS A312 TP316/TP316L with CS P n°1.1 & Pn°1.2
Replies
2
Views
348
weldstan
weldstan

Part and Inventory Search

Sponsor

Back
Top Bottom