Welding of S355JR

[IdanPV]

Hello all,

I have a SMAW-WPS made based on PQR of A106 Gr.B (P.No.1, Group No.1) I want to use this PQR to weld EN 10025-2 - 1.0045 (S355JR) which is (P.No.1, Group No.2).

I know that it this is allowed by ASME IX but I wanted to know if it is allowed by AWS D1.1 & EN 15614.

thanks!

 

[kingnero]

EN ISO 15614-1 does not allow this.