USS Highway Structures Design Handbook 1

[OSUCivlEng]

Does anyone know where I can get a copy of this? I understand that this was taken over by AISC and NSBA. The current edition is found here:

http://www.aisc.org/contentNSBA.aspx?id=20244

However I often see it referenced in other manuals and articles, even MDX references it. I'd just like to figure out how to get a copy of one of the older editions.

Thanks

 

[bridgebuster]

I haven't seen found site with a pdf; nothing for sale on Ebay. There's a copy of Volume I, circa 1977 in the office. I can try to scan the chapters (it's printed on heavy paper; not sure if it will go through the scanner) and post them. Volume I doesn't have much in the way of design examples. I have a complete copy circa 1986 at home. If scanning V-I works I'll bring V-II in.

We used to have plenty of them here but over-zealous office managers decide bookcases have to be cleaned up on a regular basis.

 

[Lomarandil]

Bridgebuster, I know what you mean... I've got a small "refugee" bookshelf of old references in my office that were flagged to be thrown out.

Every few months I get to pull one of them out and look like a genius.

 

[OSUCivlEng]

Thanks Bridgebuster, I appreciate it.

 

[bridgebuster]

Chapter I/3 - Steel Properties

 

[bridgebuster]

Chapter I/6 Fatigue

 

[bridgebuster]

Chapter I/10 Steel Piling

 

[bridgebuster]

Chapter I/11 Composite Beam Nomographs.

@OSU - I'm not in the office every day; it'll probably take about two weeks to scan everything.

 

[bridgebuster]

Chapter II-3 Composite WF Beam

 

[bridgebuster]

Chapter II-3A Composite WF LFD method

 

[bridgebuster]

Chapter II-4 Composite Plate Girder

 

[bridgebuster]

Drawings for II-3

 

[bridgebuster]

Drawing for II-3A

 

[bridgebuster]

II-4 Drawings

 

[bridgebuster]

I/5 Part 1 or 2

 

[bridgebuster]

I/5 Part 2 of 2

 

[bridgebuster]

Fatigue Design

 

[bridgebuster]

Curved Girder Fabrication

 

[bridgebuster]

II/5 Medium span Composite Plate Girder LFD

 

[bridgebuster]

II/6 Curved Girder Design