Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use of UW 16 f 3 a for small nozzles

Status
Not open for further replies.
dritchie

dritchie

Structural
Joined
May 2, 2007
Messages
3
Location
US
Is there a calculation option available in Compress that will allow small nozzles meeting the criteria of (UW 16 f 3 a) to use an external fillet attachment weld only?
 
Sort by date Sort by votes
Yes there is.

From the nozzle menu select "Type 5". Click the "Standard Size Look-Up" button, then click the "Threaded Coupling" button.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Amr Shams
  • Locked
  • Question Question
Assistance for Multi-Chamber Vessel Design in COMPRESS
Replies
2
Views
3K
amillsmuel
A
Amr Shams
  • Locked
  • Question Question
UW-21 minimum requirement for External weld for SO Flange
Replies
2
Views
926
Amr Shams
Amr Shams
C
  • Locked
  • Question Question
UG-34 ASMEVIII
Replies
3
Views
1K
Maslov
Maslov
AK8824
  • Locked
  • Question Question
Seismic Design of Columns using NBC 2015
Replies
0
Views
697
AK8824
AK8824
Amr Shams
  • Locked
  • Question Question
Inquiry on Flange Neck Thickness Adjustment During Hydrotest
Replies
0
Views
1K
Amr Shams
Amr Shams

Part and Inventory Search

Sponsor

Back
Top