Assistance for Multi-Chamber Vessel Design in COMPRESS

[Amr Shams]

Hello everyone,

I am struggling with designing a multi-chamber vessel using COMPRESS. I've attempted multiple approaches but have not been successful. I also tried incorporating an intermediate skirt to connect the chambers, but that didn't work as expected either.

Has anyone here successfully modeled a multi-chamber vessel in COMPRESS? Could you share any tips, best practices, or examples on how to approach this type of design?

Any guidance would be greatly appreciated!

 

[Trestala]

You can set separate design conditions for each component which. Can you further explain what you are trying to achieve?

 

[amillsmuel]

When placing a head, select "Internal Head".

On the next dialog box, select "Bottom Head" for concavity.

After this, you should be able to place another cylinder on that head.