Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steam Mold Temperature Control Unit

Status
Not open for further replies.
bonkers

bonkers

Mechanical
Joined
May 13, 2008
Messages
28
Location
US
I am requesting information for direct steam mold temperature control units for compression molding. I am converting from hot oil units. I need to know vendor sources and design tool info such as BTH/hr per lb. or sq. in. Max. temp. is 400 deg. F. Any tips and information on design, specifications and guidelines would be extremly helpfull!

Thanks,
Bonkers
 
Status
Not open for further replies.

Similar threads

MechMatengineer
  • Locked
  • Question Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
948
Buckshott00
Buckshott00
clyde Verse
  • Locked
  • Question Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
1K
Pud
Pud
cityjack
  • Locked
  • Question Question
Mold program to 3D model. How?
Replies
0
Views
235
cityjack
cityjack
titan0106
  • Locked
  • Question Question
unidentified liquid rsidual on the surface of connectors (PA66+30GF injection molded)
Replies
1
Views
945
Pud
Pud

Part and Inventory Search

Sponsor

Back
Top