Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mold program to 3D model. How?

Status
Not open for further replies.
cityjack

cityjack

Mechanical
Mar 5, 2013
50
Between my company and the molder we have the origimal 3D mode
Can I creat a 3D model via stwp, or ides, or something to generate a model?
Or could I use the current mold moldels to creat a part with boolean operations?

Thanks

Sid
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
333
Buckshott00
Buckshott00
clyde Verse
  • Locked
  • Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
352
Pud
Pud
rollingcloud
  • Locked
  • Question
[CIE76] How much of delta-E does this represent?
Replies
7
Views
343
IRstuff
IRstuff
Tegguy
  • Locked
  • Question
Creep in 3D printed Nylon
Replies
12
Views
477
Tegguy
Tegguy
enginesrus
  • Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
2K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top Bottom