Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mold program to 3D model. How?

Status
Not open for further replies.
cityjack

cityjack

Mechanical
Joined
Mar 5, 2013
Messages
50
Location
US
Between my company and the molder we have the origimal 3D mode
Can I creat a 3D model via stwp, or ides, or something to generate a model?
Or could I use the current mold moldels to creat a part with boolean operations?

Thanks

Sid
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
1K
Buckshott00
Buckshott00
clyde Verse
  • Locked
  • Question Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
1K
Pud
Pud
rollingcloud
  • Locked
  • Question Question
[CIE76] How much of delta-E does this represent?
Replies
7
Views
1K
IRstuff
IRstuff
Tegguy
  • Locked
  • Question Question
Creep in 3D printed Nylon
Replies
12
Views
2K
Tegguy
Tegguy
enginesrus
  • Locked
  • Question Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top