Start end and neck chamfer

[Trent5791]

How do I turn these features off? I've gone to File>Utilities>Customer Defaults>Modeling>Feature Parameters>Screw Clearance Hole, Threaded Hole and Hole Series and they are all unchecked. Please help.
Thank you

Thank you,
Trent
NX 9.0.3.4

 

[Xwheelguy]

Are you using a Template or Start Part? Did you restart NX after changing the Customer Defaults? I believe those settings will only affect NEW parts, not existing parts and it will not affect Templates or Start Parts.

Make sense?

Tim Flater
NX Designer
NX 9.0.3.4 Win7 Pro x64 SP1
Intel Xeon 2.53 GHz 6GB RAM
NVIDIA Quadro 4000 2GB

 

[Trent5791]

Restarted, yes. It must be the template or start part.


Thank you,
Trent
NX 9.0.3.4

 

[cowski]

I'd guess it's the dialog memory. Try creating a clearance hole with your desired options and press OK. Start a new hole, the options should be set to what you previously OK'd.

www.nxjournaling.com

 

[Xwheelguy]

cowski may be onto something. I do recall I had an instance where a Customer Default was changed for a different command and the path didn't update until I reset the dialog. Try clicking the button circled in the attached image & see if that does the trick. Can't hurt to try.

reset_dialog.png

Are you using a template or a start part?

Tim Flater
NX Designer
NX 9.0.3.4 Win7 Pro x64 SP1
Intel Xeon 2.53 GHz 6GB RAM
NVIDIA Quadro 4000 2GB