Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sour Water pH Electrode

Status
Not open for further replies.

cub3bead

Chemical
Joined
May 28, 2003
Messages
292
Location
US
Does anyone make a pH electrode suitable for sour water service at 450 psig/350 deg F?
 
I have seen pH electrode for sour water at the following conditions:
- 8 bara / 80 C ,
- 9 bara/ 120 C and
- 8 bara/ 45 C

You would also check pH being installed at steam boiler system for the condensate that is operating at high temperature and pressure.

Hope this would help you.

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top