I am interested in opinions regarding the practicality of dehydrating a sweet light (40 API) crude oil to a BS&W content of 0.5% using a horizontal three-phase separator fitted with high efficiency coalescing media. The emulsion forming tendency of the crude is very favorable. The crude viscosities are low and it is intended to operate the separator at 90 deg C to create good separation conditions. Fluid shear upstream of the vessel will be minimized by careful design of the upstream piping. Any experiences with similar separations are most welcome.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Separation of Crude Oil & Water
- Thread starter 121202
- Start date
- Status
Similar threads
- Question
- Question
- Locked
- Question