Oct 21, 2010 #1 MARINA221171 Mechanical Jan 13, 2010 21 hi How to save assembly to a file and load it as one part? thanks
Oct 21, 2010 #2 looslib Mechanical Jul 9, 2001 4,205 Are you trying to merge the solid components of your assembly into a single solid mass? Promote the bodies and then unite them is one way. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli Upvote 0 Downvote
Are you trying to merge the solid components of your assembly into a single solid mass? Promote the bodies and then unite them is one way. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli
Oct 21, 2010 #3 MickyV007 Mechanical Jan 14, 2009 622 Or export a iges/step/parasolid. NX will automaticly create a *.prt file for it, one disadvantage; you will have a seperate bodies for each part but you can tackle this by grouping the bodies in the new part file. Best regards, Michäël. NX4+TC9 / NX6+TC8Unified / NX7.5 native Upvote 0 Downvote
Or export a iges/step/parasolid. NX will automaticly create a *.prt file for it, one disadvantage; you will have a seperate bodies for each part but you can tackle this by grouping the bodies in the new part file. Best regards, Michäël. NX4+TC9 / NX6+TC8Unified / NX7.5 native
Oct 21, 2010 Thread starter #4 MARINA221171 Mechanical Jan 13, 2010 21 thanks looslib. promote body is exactly what i need. Upvote 0 Downvote
