Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norsok R-001, Nozzle loads

Status
Not open for further replies.
farzam53

farzam53

Mechanical
Joined
Sep 17, 2010
Messages
1
Location
NL
Dear All,

Norsok R-001 specified the minimum nozzle loads on the equipment nozzle, but it is not clear the type of these loads (Sustain, Operation, Occasional). I received nozzle loads (different cases) from our piping team defined as per DNV-RP-D101. For instance I have sustain load case (Weight + Design Pressure + Spring) and Operation case (Design conditions+Wind+Motion displacement). I'm not sure if I have to check both these cases against the minimum ones as per R-001.

Please kindly let me know your opinion

Thanks in advance

BR,
 
Status
Not open for further replies.

Similar threads

WanderingEng
  • Locked
  • Question Question
ROV Impact and Snagging Loads
Replies
2
Views
1K
Ussuri
Ussuri
J
  • Locked
  • Question Question
Calculation of Residual strength of synthetic hawser rope
Replies
2
Views
3K
jayakumaran
J
J
  • Locked
  • Question Question
Residual strength
Replies
1
Views
2K
TomLee777
TomLee777
Gabriel Pedro
  • Locked
  • Question Question
Design of gravity based structures- reinforced concrete design
Replies
1
Views
2K
Ussuri
Ussuri
Walter White
  • Locked
  • Question Question
Clamp for Riser Design
Replies
7
Views
1K
jbeckhou
jbeckhou

Part and Inventory Search

Sponsor

Back
Top