Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
New Drafting BOM Column: value = value of the qty columns * 1.1 ?
- Thread starter daluigi
- Start date
Arkance/PhoeNX
Mechanical
It can be done.
Just turn on the 'evaluate cell as formula'.
Then in the default text field put in $~Q*1.1 (or whatever multiplier you need).
To use 1.1, make sure the number of decimal places for the column is set as well.
The image below shows how it's done
Anthony Galante
Senior Support Engineer
NX3 to NX10 with almost every MR (21versions)
Just turn on the 'evaluate cell as formula'.
Then in the default text field put in $~Q*1.1 (or whatever multiplier you need).
To use 1.1, make sure the number of decimal places for the column is set as well.
The image below shows how it's done
Anthony Galante
Senior Support Engineer
NX3 to NX10 with almost every MR (21versions)
- Status
