Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modal & Harmonic Analysis w/ ANSYS

Status
Not open for further replies.
bangell

bangell

Mechanical
Joined
Feb 11, 2008
Messages
10
Location
US
I am trying to learn the basics of modal and harmonic analysis. I have been looking over an example in a textbook I have, Finite Element Procedures by Klaus-Jurgen Bathe. It is Example 9.14 on page 818. I have tried running the problem in ANSYS, but I cannot get the values that are in the example problem in the book.

Can someone help me with this problem?


Thank you!
 
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
799
Rabea-19
R
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
Anurag K
  • Question Question
Hydrostatic bearing CFD analysis
Replies
1
Views
375
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top