Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS

Status
Not open for further replies.
R

Rabea-19

Civil/Environmental
Joined
Feb 3, 2025
Messages
1
Hello Everyone,

I hope you're all doing well.

I need to perform a settlement analysis of a steam generator in an oil plant using finite element analysis (FEA) in ANSYS. If anyone has experience with this type of analysis, I would greatly appreciate guidance on the procedure.

If you have any relevant insights or resources, your support would be highly valued.

Thank you in advance!
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top