Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanical Properties of 6105-T5 1

Status
Not open for further replies.

DJKeng

Mechanical
Jun 13, 2003
28
US
I've been unable to find any tensile and yield strength listed for this alloy and temper of aluminum.

can anyone point me in the right direction?????
 
Replies continue below

Recommended for you

From the ASM metals handbook desk edition:

For extruded wire, bar, rod, or shapes:

6105-T5 -- for dia up thru 12.70mm; Min UTS: 262MPa Yeild: 241 MPa ; min elong: 10%.



 
The minimum values NickE stated are also good up to 1 inch, per ASTM B221.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top