Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Is ANSI flange equal to ASME flange 3
- Thread starter ITBT
- Start date
NozzleTwister
Mechanical
Kander,
Like the others say, there is a 22" Class 300 flange. But it's not covered by AMSE B16.5 (or even ANSI before the designation change)
This flange is covered by standard MSS-SP-44.
It's a common mistake that people think all flanges up to 24" are per B16.5. The 22" size isn't as you have found out.
I hope this helps.
NozzleTwister
Houston, Texas
Like the others say, there is a 22" Class 300 flange. But it's not covered by AMSE B16.5 (or even ANSI before the designation change)
This flange is covered by standard MSS-SP-44.
It's a common mistake that people think all flanges up to 24" are per B16.5. The 22" size isn't as you have found out.
I hope this helps.
NozzleTwister
Houston, Texas
- Status
Similar threads
- Locked
- Question
- Locked
- Question
