Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ICEM meshes to Ansys APDL 1

Status
Not open for further replies.

Portolon

Automotive
Joined
May 30, 2011
Messages
10
Location
BR
Hi everyone,

I'm using Ansys Multphisics to analise a car chassis. Is there any way to mesh the chassis on ICEM and then import the mesh with Ansys APDL?

Thanks in advance
 
Hi, that is easy. In ICEM there is possibility to export your mesh into Ansys, Abaqus or other programs.
There is also an advanced setting in ICEM that you can select the type of your mesh (solid187 or mesh200,…).


 
Could you tell me which is the command to get mesh element control, please?
Many thanks
Mick
 
Thanks Jiligeo, I'm going to do this.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top