Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HydroCAD Storm Type Kern County - Bakersfield

Status
Not open for further replies.

rswsolvana

Civil/Environmental
Jul 16, 2020
2
Was wondering if there is a recommended storm type for use in Kern County, Bakersfield area? The Kern County Hydrology Manual, at least that I can see, does a pretty location specific approach, just trying to find a close match in the storm type HydroCAD database for would be appropriate.
Thanks for any thoughts.
Steve
 
Replies continue below

Recommended for you

If your Hydrology manual recommends a specific rainfall distribution, just select that storm in HydroCAD. HydroCAD includes the new CA-1 to CA-6 rainfall distributions from NRCS plus a hundred other storms. Or you could download point-specific PFD data from NOAA and use HydroCAD to generate a synthetic rainfall distribution. It all depends on your regulations.


Peter Smart
HydroCAD Software
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor