Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Grinding Iconel in centerless machines

Status
Not open for further replies.
HectorMontalvo

HectorMontalvo

Industrial
Joined
May 22, 2003
Messages
5
Location
US
Hi everyone. We are starting a develop of valves with iconel head, the problem here is get the best parameters for grinding this kind of material, Does anyone have any idea of the problem we will have doing our job??
 
Sort by date Sort by votes
Hector,
I'm working with inconel for some time. Which kind of process are you developing?

 
Upvote 0 Downvote
We have had a very good experience in using high-porous vitrified CBN wheels for grinding Inconel. These wheels do not clog and grind a way cooler. Contact me for more detailes. gurinovich@abrazive.spb.ru
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

RanaAq
  • Locked
  • Question Question
Centreless grinding of end flat shaft
Replies
0
Views
265
RanaAq
RanaAq
B
  • Question Question
How can material deformation in laser cutting be minimized?
Replies
0
Views
6K
Bluces
B
O
Chemical Mechanical Planarization (CMP) in Wafer Fabrication Semiconductor
Replies
0
Views
2K
oday25
O
B
  • Locked
  • Question Question
Dust Collector Gate Actuator in Hazardous Location
Replies
3
Views
4K
btrueblood
btrueblood
CarlosGarza10
  • Locked
  • Question Question
Is it possible to calculate punts using RPMs in an extruder
Replies
0
Views
553
CarlosGarza10
CarlosGarza10

Part and Inventory Search

Sponsor

Back
Top