Why do two feature managers appear sometime? What is the purpose of two feature managers option? (I pulled one of the feature managers on to the other to see one, which was done on one of the book examples. But, it keeps coming up many times. There should be a good reason for this). Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Feature manager
- Thread starter Sripri
- Start date
CorBlimeyLimey
Mechanical
Probably for the same reason as you asked 3 days ago.
thread559-192397
Why start a new thread?
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
thread559-192397
Why start a new thread?
A question for each Feature Manager ... I guess?
Chris
SolidWorks 07 4.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 04-21-07)
Chris
SolidWorks 07 4.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 04-21-07)
You can perform different functions within the feature manager. Having it split lets you access two of those functions at the same time.
If it keeps popping up, then you may be hitting a shortcut key assigned to turning it on, or your settings are default to split FM.
Matt
CAD Engineer/ECN Analyst
Silicon Valley, CA
sw.fcsuper.com
Co-moderator of Solidworks Yahoo! Group
If it keeps popping up, then you may be hitting a shortcut key assigned to turning it on, or your settings are default to split FM.
Matt
CAD Engineer/ECN Analyst
Silicon Valley, CA
sw.fcsuper.com
Co-moderator of Solidworks Yahoo! Group
- Status
Similar threads
- Question
- Locked
- Question