Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

epoxy coating spray application

Status
Not open for further replies.
mordoz

mordoz

Electrical
Joined
Apr 6, 2003
Messages
1
Location
US
I was wondering if I can apply a two part epoxy coating over a fiberglass substrate with a tangential turbine HVLP sprayer unit. I am using Devoe 233H. The manufacturer in the literarture seems to recommend airless spray application, however the tank is rather small and I have seen in some sites on the web that HVLP is a viable alternative.
Can anybody help?
 
Status
Not open for further replies.

Similar threads

Bob_3
  • Locked
  • Question Question
1000 hr salt spray coating
Replies
1
Views
1K
TugboatEng
TugboatEng
nyfi
  • Question Question
What are reuirements to revalidate expired coating/lining paint material
Replies
2
Views
3K
WKTaylor
WKTaylor
YungPlantEng
  • Locked
  • Question Question
Thermal Spray Coating - Adherence to cast vs wrought
Replies
0
Views
863
YungPlantEng
YungPlantEng
david339933
  • Locked
  • Question Question
Epoxy Zinc Primer Burnish
Replies
6
Views
1K
david339933
david339933
clandestinho
  • Locked
  • Question Question
fungicide for 2K polyurethane coating in marine environment
Replies
1
Views
1K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top