Oct 10, 2023 #1 david339933 Industrial Jun 15, 2011 1,204 Will epoxy zinc rich primer burnish (turn shiny) like inorganic zinc when rubbed?
Oct 13, 2023 #2 0707 Petroleum Jun 25, 2001 3,338 Try your hand at brushing a plate painted with your specification with a steel brush or other abrasive. Upvote 0 Downvote
Try your hand at brushing a plate painted with your specification with a steel brush or other abrasive.
Oct 13, 2023 #3 TugboatEng Marine/Ocean Nov 1, 2015 11,447 In my understanding, zinc rich epoxy and inorganic zinc are the same coating. Upvote 0 Downvote
Oct 15, 2023 #4 hokie66 Structural Jul 19, 2006 22,627 Regardless of what the surface looks like new, epoxy will dull with time. Upvote 0 Downvote
Oct 15, 2023 #5 SJones Petroleum Apr 22, 2001 3,901 @Tug - your understanding is not correct. Two different binders, two different curing mechanisms. Steve Jones Corrosion Management Consultant http://www.linkedin.com/in/drstevejones All answers are personal opinions only and are in no way connected with any employer. Upvote 0 Downvote
@Tug - your understanding is not correct. Two different binders, two different curing mechanisms. Steve Jones Corrosion Management Consultant http://www.linkedin.com/in/drstevejones All answers are personal opinions only and are in no way connected with any employer.
Oct 16, 2023 Thread starter #7 david339933 Industrial Jun 15, 2011 1,204 According to PPG Technical, burnishing is normal. "Coin test" is often done to check the cure. Upvote 0 Downvote
