VirgilSECARA
Mechanical
Can I make an equation betwen a part dimension and the distance betwen another 2 parts in an assambly? How?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can I make an equation betwen a part dimension and the distance betwen
- Thread starter VirgilSECARA
- Start date
- Status
Hi VirgilSECARA.
I think you can make it by this way. Within part environments check export of parameters you interest in(table of parameters-"fx").In assembly use derived part and check parameters only. Do it as many times as you have parts in equation.
In the table of parametrs (assembly) you will find part parameters and make your equation for value of certain constrain(s).
I think you can make it by this way. Within part environments check export of parameters you interest in(table of parameters-"fx").In assembly use derived part and check parameters only. Do it as many times as you have parts in equation.
In the table of parametrs (assembly) you will find part parameters and make your equation for value of certain constrain(s).
- Status
Similar threads