Buying of Inconel 718 and X750 1

[DISCMAN]

I am a German engineer working for a company who manufacture disc springs.
We are looking for manufacturers of Inconel 718 and X750 acc. to AMS 5596J
We are looking for smaller quantities from 100-2200 lb.
I am looking forward to any reply.
Thanks.

 

[EdStainless]

One of the specialty aircraft distributors.
Ulbrich or Furture Metals.
You quantities are too small for a mill to address.
You might want to contact MetalImphy in France and find out which distributors they sell those grades to.

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm

 

[metengr]

http://www.specialmetals.com/products/

 

[yates]

Special metals will not normally supply small quantities. go rather to distributors (Perryman, Fry Steel in USA) or wire drawers dpending on diameter you neeed (Brown Europe in France)

 

[JamesCKelly]

This sort of quantity in 718 sheet may be supplied by

http://www.rolledalloys.com

They are headquartered in the USA but have warehouses in England and France.