Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
axial-Piston motor/pump
- Thread starter johnny08
- Start date
Study structure and performance of currently manufactured pumps like Parker's:
Ted
Ted
One difficulty in designing a pump/motor has to do with valve design. To eliminate pressure trapping yet seal and separate the ports is difficult. Keeping the valve plate from leaking or having too much contact pressure is another problem.
This software for designing pumps that may help The EPA has done pump motor development for their hybrid drive so try contacting them.
I’ve been working on an electro-hydraulic pump motor to solve many of the problems inherent to current axial piston pump/motors but the project is currently stalled due to a lack of funding and time. Check the DEHydS link for more information.
Ed Danzer
This software for designing pumps that may help The EPA has done pump motor development for their hybrid drive so try contacting them.
I’ve been working on an electro-hydraulic pump motor to solve many of the problems inherent to current axial piston pump/motors but the project is currently stalled due to a lack of funding and time. Check the DEHydS link for more information.
Ed Danzer
- Status