Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Associative Appendix Text

Status
Not open for further replies.

NX_USER_123

Aerospace
Joined
Jul 24, 2018
Messages
3
Location
NL
Hi all,

First post here so a big hello to everyone.

I have recently made a mishap on a drawing where I placed the C'bore depth tolerance in the appendix text of the hole note, which meant it wasn't associative to the model feature. Subsequently that dimension was incorrect.

I'm wondering if there is a way to make the appendix text associative?


I am using NX10.

Hope this makes some sense.

thanks.

 
Thanks. Found my solution.

> Feature Parameters
> Select the Feature you want to import dimensions for
> Click Select Views
> Choose a view
> Dimension should appear and the tolerances can be adjusted by altering the settings (right click, settings)
> Drag the dimensions around each other to alter their order or place them inline with each other (its little fiddley)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top