Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME-Holding time after welding before NDT

Status
Not open for further replies.
Odd01

Odd01

Materials
Joined
Jan 31, 2013
Messages
10
Location
NO
Hi,

Is there someone that know where to find in ASME standard where it is mention holding time after welding before
NDT can be carry out(example 24h after welding).

Tanks, Odd01
 
Sort by date Sort by votes
Not sure on ASME, but AWS D1.1 C6.11 specifies 48h after welding for high strength QT steels (ASTM A514, A517). NORSOK has a similar requirement.
 
Upvote 0 Downvote
Thanks for information.
Odd01
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MhmdNfri
  • Question Question
ASME Sec. I / NDT / PW-11 / Table PW-11
Replies
2
Views
489
goutam_freelance
goutam_freelance
JT0202
  • Locked
  • Question Question
ASME QG-106.4
Replies
2
Views
2K
DekDee
DekDee
H
  • Locked
  • Question Question
Welding Position GTAW orbital welding tube-to-tubesheet
Replies
2
Views
3K
XL83NL
XL83NL
timsch
  • Question Question
ASME SEC.IX WPS filler designation
Replies
3
Views
660
DekDee
DekDee
bck2ftr
  • Question Question
ASME B16.9 - factor f for proof test
Replies
3
Views
11K
goutam_freelance
goutam_freelance

Part and Inventory Search

Sponsor

Back
Top