Angular Acceleratin Units in ANSYS APDL

[struclearner]

ANSYS APDL does not have any units specified option, only the units shuld be consistent. I am wondering, if the model has English units, that is inch and pounds, in what units, Angular Acceleration will be calculated to apply that is, revolutions/sec^2 or radian/sec^2 or degrees/sec^2.

Thanks for help.

 

[L_K]

https://www.sharcnet.ca/Software/Ansys/17.0/en-us/help/ans_cmd/Hlp_C_DCGOMG.html

 

[struclearner]

L K, Thanks for help.
ANSYS APDL units for Angular Acceleration are rad/sec^2, the angular acceleration calculated/converted in rad/sec^2 and applied as inertia load will give the correct results.