AN, MS and NAS hardware drawings

[robonave]

I am looking for standard hardware parts drawings in any common CAD format (DXF, IGES, etc) or even specific format (CATIA, SW, AMD, etc); a search on the net didn't take me any useful information, does anybody here know if and where are these standards available?
Thanks

robonave

 

[TVP]

MS & AN drawings, as well as MIL standards can be obtained from the following website:

http://assist2.daps.dla.mil/quicksearch/

 

[dascott]

This might be of interest.

http://www.traceparts.com/en/user/tpcd.asp