Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

acoustic analysis

Status
Not open for further replies.
mohamm21

mohamm21

Automotive
Joined
Jan 23, 2003
Messages
10
Location
GB
hi, i am performing coupled structural-acoustic analysis of an automotive compartment. can anyone help me how to model a fluid-structure interface in Ansys. i have the geometry of the interior cavity. can i find any help on the web for the acoustic analysis
 
Sort by date Sort by votes
You can see one exapmple for FSI couping under acoustic in ansys help.You are going to have three domains.One is cavity which will be meshed with fluid element with structure absent ,other domain which is in between structure and splid which will be meshed with structure present and other domian is soid/structure which is meshed with soid element.You are going to switch on FSI interface between second and third domain.

Surya Prakash
Project Manager
surya@tecumsehindia.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Anurag K
  • Question Question
Hydrostatic bearing CFD analysis
Replies
1
Views
360
karachun
karachun
Anatoly_k
  • Locked
  • Question Question
Pipe Burst Pressure - elastic-plastic analysis strange asymmetry
Replies
0
Views
911
Anatoly_k
Anatoly_k
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
787
Rabea-19
R
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
LIAM_7
  • Locked
  • Question Question
ANSYS and fatigue analysis
Replies
0
Views
437
LIAM_7
LIAM_7

Part and Inventory Search

Sponsor

Back
Top