Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Workbench MechHPC License issue

Status
Not open for further replies.
borjame

borjame

Aerospace
Joined
Jun 11, 2002
Messages
71
Location
US
Hello all,

I'm running Workbench 12.1 and recently it started having issues grabbing the Mech HPC license. Once workbench is started it will be able to grab a license for a few solves, and then it will fail to grab the license until I restart Workbench. The only way to solve the model at that point is drop the number of processors to two. This pattern continues. Ansys classic has no issue acquiring and using the mech HPC license.

Anyone ever encounter this and solve it?
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
IJR
  • Locked
  • Question Question
Workbench 19: Submodelling (?) error
Replies
0
Views
440
IJR
IJR
IJR
  • Locked
  • Question Question
Ansys workbench structural:Two load steps different large displacement settings?
Replies
0
Views
555
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top