Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wipeouts in Land Desktop 3
- Thread starter matardif
- Start date
Method #1
Turn off the Merge Control option and use the DRAWORDER command so that the drawing will print the way you want.
Method #2
Do not use wipeouts. Instead, delete the areas of the drawing that you do not want to print.
Note: You could also move the objects to a non-printing layer, but the objects will still be displayed on screen.
Turn off the Merge Control option and use the DRAWORDER command so that the drawing will print the way you want.
Method #2
Do not use wipeouts. Instead, delete the areas of the drawing that you do not want to print.
Note: You could also move the objects to a non-printing layer, but the objects will still be displayed on screen.
- Status
