Where to start designing a Air Vane Pump?

[suyog21]

I want design 7.5 kw air vane pump with 10 m3/hr. But I am stuck where to start.

Do i go shaft--> vane displacement--> rotor --> cam ring --> Casing etc...

as not able to get any literature on same , more centrifugal pump is found.


Suyog Patil
CAD Engineer
NX 7.5. 8, 8.5 9, 10 TC-9

 

[MikeHalloran]

First you decide if the pump will run lubricated or dry, then you start selecting a set of materials.


Mike Halloran
Pembroke Pines, FL, USA

 

[suyog21]

It will run dry .. material will steel for shaft rotor and camring and vane (case hardened).

Suyog Patil
CAD Engineer
NX 7.5. 8, 8.5 9, 10 TC-9