Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

when would vertical strain equal negative of lateral strain?

Status
Not open for further replies.
bebme

bebme

Bioengineer
Joined
Apr 11, 2008
Messages
19
Location
US
I am compressing a hyperelastic material in a 2D plane strain quasi-static model. When I view my strain results, my maximum principal logarithmic strain equals the negative of my minimum principal logarithmic strain. Not sure why this occurred since Poisson's ratio is assumed .5 not 1. Any suggestions??



Rich
 
Status
Not open for further replies.

Similar threads

SamanthaL
  • Locked
  • Question Question
How can gene editing technologies optimize microbial production of hyaluronic acid to increase yield and reduce costs?
Replies
2
Views
5K
Compositepro
Compositepro
Dharmendra_Tyagi
  • Locked
  • Question Question
issue with calculating the radial strenth of stent
Replies
4
Views
1K
Dharmendra_Tyagi
Dharmendra_Tyagi
saja11
  • Locked
  • Question Question
Difference in graphs of confidence intervals and parametric test in SPM analysis
Replies
0
Views
886
saja11
saja11
ohiamdaniel
  • Locked
  • Question Question
Radial Strength of Stent (ABAQUS)
Replies
2
Views
933
FEA way
FEA way
Harini Krishna
  • Locked
  • Question Question
Determination of glucose content in hot bevrages
Replies
2
Views
255
Harini Krishna
Harini Krishna

Part and Inventory Search

Sponsor

Back
Top