Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What liner to guide for a s-duplex caisson? 1

Status
Not open for further replies.

steve101

Structural
Joined
Sep 27, 2003
Messages
16
Location
GB
New mild steel guide , clamped to +9m brace. Retrofit superduplex caisson. Probably have a 25mm anulus. Is a rubber liner to the guide barrel adequate for isolation? PTFE? 20year design life.
 
Is there any rubber liner guaranteed for 20 years? If yes. then rubber is the cheapest. I would however, opt for some spacers and some good paint on the most nobil one (the duplex). You'll get contamination only if there is direct contact.
 
For example Epoxy based elastomer might be able to do the job. Little more information is required on mechanics and chemical exposure conditions. For detailed information on integrated open source material advice (corrosion + permeation + mechanical retention) you may also try:

Cheers,
Rodney
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top