Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

welding a 2.5" pipe to 6" pipe without fittings

Status
Not open for further replies.
Alireza01

Alireza01

Mechanical
Joined
Feb 14, 2017
Messages
14
Location
IR
Does it comply with ASME B36.1 to weld a 2.5" pipe to a 6" main pipe through making hole on the main pipe and welding the other pipe in the T form? both pipes are seamless sch 40 and water pressure is 100 psi.
 
Sort by date Sort by votes
What's your Code of Construction?
 
Upvote 0 Downvote
do you mean B 31.1 ? 36.1 doesn't exist AFAIK

If so check out para 127.4.8

Design temp makes a difference also.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
yes, I mean asme b31.1.
& also cold water run in the pipe.
thank you.
 
Upvote 0 Downvote
Review para 104.3.1 and do the calculations to find your answer.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Welding Position GTAW orbital welding tube-to-tubesheet
Replies
2
Views
3K
XL83NL
XL83NL
M
  • Locked
  • Question Question
ASME 16.5 2020 vs 2013 wrong pipe OD
Replies
0
Views
806
minodi
M
Karik87
  • Question Question
CVN test at Weld Metal with ER70S-6
Replies
19
Views
11K
weldstan
weldstan
jayinwww
  • Question Question
Calculating Stress Ratio ASME B31.3 Figure 323.2.2A Note 6
Replies
0
Views
410
jayinwww
jayinwww
jietepipefittings
  • Locked
  • Question Question
SLIP RING RJ 36" CL900 ASTM A240 GR.304/304L
Replies
3
Views
570
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top