Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Welding 446SS 1
- Thread starter donnaj
- Start date
-
1
- #2
It depends on your application - service temperature. The Ni-base filler metals are your best bet and austenitic stainless filler metals will work.
See the information below;
See the information below;
You might want to give these people a call. I have seen their electrodes used on 446 SS. Don't remember the type but it worked.
- Status
Similar threads
- Solved
