Water network design software

[cabalen]

Is there any available water network design software which I could use for sizing pipe loops and determining water flows?

thanks

 

[lilliput1]

Pipe-Flo be Engineered Software, Inc.
4531 Intelco Loop
Lacey, WA 98503
Phone (360) 412-0702
email = solutions@eng-software.com

Their Flo-Series program also have Con-Flo, Ori-Flo & Pump-Flo for valve selection, flow meter sizing and pump selection.

 

[PlantEng]

If you would like to go a little cheaper. AFT Fathom will do a very adequate network flow analysis and allow you to put the pump curve in and iterate to the system curve. Its also user friendly, You may not have to open the manual.

There is also a little program put out by the makers of the Crane 410 paper.

 

[smckennz]

If you are as cheap as I am, you may wish to google EPAnet.
Its fairly limited, but the price is right - free.

Cheers

Steve

 

[cabalen]

thanks for all of your input guys. I appreciate it much!

-cris