Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Water network design software
- Thread starter cabalen
- Start date
Pipe-Flo be Engineered Software, Inc.
4531 Intelco Loop
Lacey, WA 98503
Phone (360) 412-0702
email = solutions@eng-software.com
Their Flo-Series program also have Con-Flo, Ori-Flo & Pump-Flo for valve selection, flow meter sizing and pump selection.
4531 Intelco Loop
Lacey, WA 98503
Phone (360) 412-0702
email = solutions@eng-software.com
Their Flo-Series program also have Con-Flo, Ori-Flo & Pump-Flo for valve selection, flow meter sizing and pump selection.
If you would like to go a little cheaper. AFT Fathom will do a very adequate network flow analysis and allow you to put the pump curve in and iterate to the system curve. Its also user friendly, You may not have to open the manual.
There is also a little program put out by the makers of the Crane 410 paper.
There is also a little program put out by the makers of the Crane 410 paper.
- Thread starter
- #5
- Status
Similar threads
- Question
- Question
