Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warning in ETABS : Some design loading combinations do not have results available.

Status
Not open for further replies.
nades

nades

Structural
Joined
Aug 10, 2001
Messages
15
Location
SY
I am running a 25 story RC model in ETABS, and I got this message during running:
Some design loading combinations do not have results available. Design will ignore such loading combinations. Check if required load cases have been run.

I checked everything and the results are there. But I still get this message. The reinforcement of PEIRS is much less than expected values.

Has anyone faced such a problem, and how is it solved.
 
Status
Not open for further replies.

Similar threads

X4vier
  • Locked
  • Question Question
"do you want to reiterate analysis and design" Option not available on ETABS 22
Replies
4
Views
1K
Luceid
Luceid
Tygra_1983
  • Locked
  • Question Question
Natural Frequencies in ETABS
Replies
5
Views
2K
GregLocock
GregLocock
GJoeRMK
  • Question Question
Modeling question in etabs, What Etabs does to a shell element to make it "ribbed" ?
Replies
2
Views
14K
JoshPlumSE
JoshPlumSE
Johnamaro
  • Locked
  • Question Question
Auto Wind - ETABS
Replies
0
Views
1K
Johnamaro
Johnamaro
GODs HAT
  • Question Question
Sync feature for ETABS
Replies
2
Views
2K
GODs HAT
GODs HAT

Part and Inventory Search

Sponsor

Back
Top