Nov 12, 2009 #1 ceekay Civil/Environmental Joined Nov 12, 2009 Messages 1 Location LK I wanted to find out about the coefficient or the volume reduction percentage to used for for aggregate base course. MDD - 2.37, with moisture content of 6%. 98% compaction of MDD is require
I wanted to find out about the coefficient or the volume reduction percentage to used for for aggregate base course. MDD - 2.37, with moisture content of 6%. 98% compaction of MDD is require
Nov 13, 2009 #2 GoldDredger Civil/Environmental Joined Jan 16, 2008 Messages 172 sounds like a homework assignment. Upvote 0 Downvote
Nov 17, 2009 #3 fattdad Geotechnical Joined Sep 7, 2006 Messages 2,790 Location US I think students would understand that numbers must be referenced with their appropriate units though. . . f-d ¡papá gordo ain’t no madre flaca! Upvote 0 Downvote
I think students would understand that numbers must be referenced with their appropriate units though. . . f-d ¡papá gordo ain’t no madre flaca!
Nov 18, 2009 #4 Ron Structural Joined Sep 24, 1999 Messages 16,336 Location US Use weight-volume relationships for before and after conditions. That will give you the appropriate factor. If this is a homework problem, don't post again. Hint provided, you solve it. Upvote 0 Downvote
Use weight-volume relationships for before and after conditions. That will give you the appropriate factor. If this is a homework problem, don't post again. Hint provided, you solve it.