Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

using rebar in O-Cell

Status
Not open for further replies.
EngMan40

EngMan40

Civil/Environmental
Joined
Jan 11, 2009
Messages
66
Location
US
Do I need to design the rebar for the O-Cell test pile socketed in rock or are the pair of C5 steel channel (o cell carrying cage) along with the concrete which is under compression enough to carry the test load to failure at around 5,000 kip?
 
Sort by date Sort by votes
Frame is enough, no need for additional rebar, for the sake of load test.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pelelo
  • Question Question
Auger cast pile with no rebars
Replies
8
Views
8K
dik
dik
Mustafa Al
  • Locked
  • Question Question
Group pile design using Group and Staad pro
Replies
0
Views
428
Mustafa Al
Mustafa Al
NBRY1
  • Locked
  • Question Question
One-Third Increase in Lateral Resistance for Footing (Sliding Only)
Replies
1
Views
2K
HTURKAK
HTURKAK
SWitmer
  • Question Question
Drilled Pier - Minimum Comp Strength in ACI 318-19
Replies
1
Views
8K
JAE
JAE
M
  • Locked
  • Question Question
Punching shear in etabs (Also safe)
Replies
0
Views
1K
Mohammddcharara
M

Part and Inventory Search

Sponsor

Back
Top