UPDATE VIEWS DO NOT RETAINED AFTER PART CLOSE AND REOPEN

[Ehaviv]

Hi

I hav a part that after I perform "update views" is OK, and after part save and open
I get "out of date".

Is theire a NX tool or a way to know and locate the cause of this.

Drawing is in non-master part (NX8.5)

NOTE: I can not post the part (company constraint)

Thanks in advanced

 

[jerry1423]

Do you save the part before closing it ?

 

[Ehaviv]

Hi

Yes! I save before I close.

NX give no hint and no error massage.

Theire are many components and "try and fail" may take Time and irritation.

Thanks

 

[ranjithbelur]

this is may be because of assembly load options settings. change the settings to AS SAVED then open the drawing.

 

[Ehaviv]

Translate











אנגלית

עברית

איטלקית


אתר שפה









עברית

אנגלית

ערבית











ניסיתי וזה AS SAVEDלא עזר


Hi

I tried AS SAVED and that did not help.

We work with TeamCenter 8 if that can say something.

I was expecting from NX to give me a hint ( Which object is causing problems )

Thanks

 

[Ehaviv]

Hi

I tried AS SAVED and that did not help.

We work with TeamCenter 8 if that can say something.

I was expecting from NX to give me a hint ( Which object is causing problems )

Thanks

 

[jerry1423]

Does it appear that only one view is out of date?
Possibly a section view?

 

[Ehaviv]

What tasks do APDATE VIEWS do ?.

What objects it touches ?.

Thanks

 

[Ehaviv]

Yes 1 view of 7 keep its apdating and the other not.

Thanks

 

[Ehaviv]

Now the part does not bother me and I decided to leave it as is.
But my curiosity how to put my finger on the wayward object not let me