UG Sketcher Automation

[sunnylooks]

I have one drawing which i need to make in UG sketcher.It is a drawing of Wheel Rim.
It is often required to be edited according to vehicle specification,,,,what i want is changing one of the dimension should update the whole sketch in UG...

How could i do so.

 

[JohnRBaker]

You're going to have to provide a bit more information, but based on the fact that others have done similar tasks (I'm basing this statement on what I THINK you're try to say), there should be no problem.

That being said, I can't help but feel that based how you've asked this question, it indicates to me that you have very little experience using NX or for that matter, creating sketches. And please don't expect someone to 'teach' you how to do something like that using posts on Eng-Tips. You may have to get some local training or some outside mentoring.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.