Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

type 409 versus type 321 for Ht. Exchanger Application

Status
Not open for further replies.

newguy

Mechanical
Oct 4, 2000
1
US
In the comparison of these two stainless steels, is it accurate to say that although the type 409 has a lower coefficient of expansion then 321, for the ht. exchanger application the 321 is still superior because of the addition fo Ni gives it greater strength at elevated temperatures? [sig][/sig]
 
Replies continue below

Recommended for you

Yes for high temperature applications 321 is always better than 409 grade. This is because of the presence of high amounts of Nickel which imparts this superior properties.

Dr Arun Rao
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top