Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TIG+SMAW in INOX series 300

Status
Not open for further replies.
Calidad

Calidad

Mechanical
Joined
Sep 29, 2002
Messages
12
Location
ES
Hello Coleagues:


I'm looking for heat input values or ranges to apply in descripts procees when we weld inox series 300 as inox 304L.

Could anybody inform me about it?

Best regards

Calidad
calidad@integasa.com
 
Status
Not open for further replies.

Similar threads

K
  • Question Question
GTAW WPS using GTAW/SMAW PQR
Replies
7
Views
8K
A.Nour
A
Samingme755
  • Locked
  • Question Question
Asme B16.47 series A and B
Replies
1
Views
3K
LittleInch
LittleInch
IdanPV
  • Question Question
Allowable Stress in ASME B31.1 - Table A-3
Replies
0
Views
4K
IdanPV
IdanPV
YuJie_PV
  • Question Question
factors to be considered for vessels in cyclic service
Replies
11
Views
11K
IdanPV
IdanPV
YuJie_PV
  • Question Question
ratcheting: The loading results in only primary stresses without any cyclic secondary stress
Replies
4
Views
5K
YuJie_PV
YuJie_PV

Part and Inventory Search

Sponsor

Back
Top