Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thrust block for lamination (welding) connection in GRP

Status
Not open for further replies.
sykimm

sykimm

Coastal
Joined
Nov 30, 2003
Messages
35
Location
KR
Please help me!

Do I know whether it is required to provide thrust block for laminated (butt welding)connection of GRP pipe lines?

Somebody said me that only separatable joint connection wouldl be required to provide thrust block to against fitting separation.

Is it correct?
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
Anchor Block Sizing Factor?
Replies
11
Views
16K
mqr7
M
m1208
  • Locked
  • Question Question
Thrust block for water pipe hanging from the bridge structure
Replies
9
Views
1K
bridgebuster
bridgebuster
C
  • Locked
  • Question Question
If HSS Column is welded to baseplate, then how does one knows is that a moment (fixed) connection or pinned connection?
Replies
2
Views
2K
SteelTubes
SteelTubes
TDean42
  • Locked
  • Question Question
Brick Storm Sewer Culvert Connection
Replies
3
Views
785
bimr
bimr
D
  • Locked
  • Question Question
rebar in the mortar between concrete blocks
Replies
3
Views
3K
JAE
JAE

Part and Inventory Search

Sponsor

Back
Top